Witschi Chronoscope S1 (G2) with touch screen and standing microphone

for Witschi and Elma testers: Watch-matic III Chronoscope S1 Chronoscope X1 Analyzer Twin Analyzer Q1

For transmitting measured values to a PC. System requirements: Windows 2000, XP, or Vista Includes: CD-ROM with PC software and instruction manual AT link cable RS232 cable

Allows for connection of up to 4 devices to 1 printer.

The Chronoscope S1 (G2) is a measuring instrument for efficient and professional testing of watches for repair service and quality control in the industrial sector. The control concept is simple and very convenient as well as modern with the various touch and swipe functions on the touch screen. Measurement options: Rate deviation, amplitude, and beat error of mechanical watches. Beat diagram. Beat number: Automatic selection for all common beat numbers. Manual selection for any beat number between 3,600 to 72,000 A/h and 360,000 A/h. Measuring mode: Standard mode for watches with the Swiss escapement Spe1 mode for watches with coaxial escapement Spe2 mode for watches with robin escapement Spe4 Mode with specific amplitude filter for the measurement of watches with Swiss escapement Spe6 mode Chronograph "Foudroyante" (flashing second) Gain control Automatic. Manual correction option for watches with secondary noises or unusual beat noises Selectable display modes - Diagram: Continuous diagram recording of the beat noises and numeric display of the measured values for rate deviation, amplitude, and beat error - Vario: Verification of stability of rate, amplitude, and beat error for a period of up to 100 hours - Sequence Stabilisation time adjustable from 2 s to 2 min Measurement time adjustable from 4 s to 10 min Measuring cycle adjustable from 2 to 6 test cycles - Scope: Representation of beat noises with adjustable time scale: 20, 200, 400 ms Rate deviation: numerical display in s/d Resolution: 0.1 s/d Measuring range: ± 999 s/d Accuracy: ± 0.1 s/d Amplitude: numerical display in degrees Resolution: 1°. Measuring range 80° to 360° Accuracy: ± 0.4° Lift angle: adjustable from 10° to 90° Resolution: 0.1° Isochronism: numerical display in milliseconds Resolution: 0.1 ms. Measuring range: 9.9 ms Accuracy: ± 0.1 ms Selectable time scale for recording: 1 to 16 mm/ms (zoom) Any of the last eight screens can be accessed. Features Measuring time adjustable: 2, 4, 6, 8, 10, 20, 30, 40, 50, 60, 120, 180, 240 s and automatic determination of the shortest possible measurement time Available languages: French, English, German, Spanish, and Italian Time base: Pre-aged, thermo-compensated high frequency quartz time base, OCXO Stability: +/- 0.004 s/d in the range from 10 to 50 °C Ageing: in the first year max. +/- 0.03 s/d Display: capacitive touch screen with backlight, resolution 800 x 480 pixels Acoustic test: built-in speakers, can be switched on and off Housing: plastic, anthracite-coloured Front panel: glass Interfaces: 2 x USB type A for mouse and memory stick 1 x USB type B for firmware updates RS232 for printer and calibration system Ethernet DIN 6-pin for manual multi-layer microphone or Micromat S (accessory) 230 Volt / 50 Hz. Includes: standing microphone

The new thermal printer with Bluetooth interface. Thanks to its compactness gain space and have a lot of placement options. You can print out your test and measurement results with several Witschi devices on this printer. If you have older Witschi devices that do not have USB ports for a Bluetooth dongle, this is not a problem. Then connect your Witschi device via the RS232 connection with the printer. The ticket with your measured results after printing automatically cut off (auto cutter). Technical specifications: - With Dongle applicable to the Witschi devices: Chronoscope X1 (G3), Chronoscope X1 (G2), Chronoscope S1 ((G2) and Watch Expert (from generation 2016) - Bluetooth range: max. 10 m - Number of connectable devices: max. 10 pieces.

Clamping microphone for alarm clocks and clocks

Fits Elma and Witschi devices Watch-Matic 3 Chronoscope S1 Chronoscope M1 Chronoscope X1

Fits Elma/Witschi pendulum clock recorder (Flume SKU 4352210)