-
Tools/supplies
-
Drilling, polishing, grinding
-
Turning
-
Facilities, compressed air and vacuum
-
Goldsmith special tools/GRS
-
Small tools
-
Soldering, melting, casting, welding
-
Measuring and testing
-
Surface treatment
-
Clean, dry, turning, sawing
-
CAD-software / software
-
Watchmaker tools
-
Castles from
- Band service
-
Insertion apparatus
-
Mainspring
-
Case opener and-closer
-
Glass service
-
Oil, oils, fats
-
Driving and rivets
-
Movement holder for small watches
-
Cone roller burnishing equipment
-
Hand tools
-
Tool kit for the watch service
-
Tool assortments
-
Other small clock tools
-
Other large clock tools
-
Spezialwerkzeuge für Rolex
-
Zifferblatt Fräsvorrichtung
-
Castles from
-
Sales and workshop tools
-
Drilling, polishing, grinding
BERGEON Watch Bracelet Adjusting Tool
Product number:
344338
Packaging Unit:
1
From Stock
| Article name: | Pin driver |
|---|---|
| Brand: | Bergeon |
| Catalogue item No.: | 7250 |
| Dimensions width mm: | 80 |
| External dimension length: | 100 |
| Gross weight grams: | 600 |
| Material: | Plastic |
0 of 0 reviews
Login
No reviews found. Be the first to share your insights.
Replacements
Dimensions Ø mm:
0.8
For Ref. 344338
Dimensions Ø mm:
1.0
Replacement pin, short. Ø 1.00 mm. Length 27 mm.
For: Horizontal device to drive in and out pins, 7250.
Dimensions Ø mm:
2.5
Pin, short. Ø 2.50 mm. Length 20 mm.
For: Horizontal device for knocking in and out the tape pins (Bergeon 7250 (Flume 344338))
Dimensions Ø mm:
0.8
Pin. Ø 0.80 mm. Length 33 mm.
For: Horizontal device for knocking in and out the tape pins (Bergeon 7250 (Flume 344338))
Dimensions Ø mm:
1.0
Pin. Ø 1.00 mm. Length 33 mm.
For: Horizontal device for knocking in and out the tape pins (Bergeon 7250 (Flume 344338))
Product information "BERGEON Watch Bracelet Adjusting Tool"
This pin driving stand allows you to drive bracelet pins in and out without the use of hammers in a very easy way. The band support table adjusts height to fit a variety of sizes of band. Easy to use operation, just place the band in the support and line the link pin with the pusher pin. Use the outside screw to apply pressure and push the pin out of the band. This design reduces the chance of damage being done by taking out the margin of human error and hand held pin pusher and hammer have. Supplied with 5 pins:
1x 27 mm / Ø 0.80 mm
1x 33 mm / Ø 0.80 mm
1x 27 mm / Ø 1.00 mm
1x 33 mm / Ø 1.00 mm
1x 20 mm / Ø 2.50 mm
- Stability of tool make it easy to use
- Easy height adjustment for different band thicknesses
- Includes 8 tips; 2 each of 0.80mm and 1.00mm in long and short length
- Fits band approximately 40mm wide
- Extra pins stored in base
- Rubber feet for skid free surface
- Swiss made
1x 27 mm / Ø 0.80 mm
1x 33 mm / Ø 0.80 mm
1x 27 mm / Ø 1.00 mm
1x 33 mm / Ø 1.00 mm
1x 20 mm / Ø 2.50 mm
- Stability of tool make it easy to use
- Easy height adjustment for different band thicknesses
- Includes 8 tips; 2 each of 0.80mm and 1.00mm in long and short length
- Fits band approximately 40mm wide
- Extra pins stored in base
- Rubber feet for skid free surface
- Swiss made