Complete gold-plating set - start right away!
Product number:
359036
Packaging Unit:
1
From Stock
Downloads
| Application: | gild |
|---|---|
| Article name: | Gilding set |
| Brand: | Kreul |
| Content: | 10,00 |
| Unit content: | pcs |
Login
Accessoires (optional)
Clear Protective Lacquer
Artikel-Nr.: 326082
Content:
300.00
A specially formulated, high-quality lacquer for metals, but also for wood, cardboard, etc. Recommended for blank and patina-finished tin and pewter casts.
Prevents tarnishing.
300 ml.
Zapon lacquer 250ml
Artikel-Nr.: 326111
The better protection for silver surfaces!
The Zaponlack is a glossy one-component solvent-based clearcoat. It is characterized by rapid drying, good scratch resistance, low intrinsic color and high resistance to yellowing.
The zapon varnish is especially suitable
- especially as a long term tarnish protection for silver or silvered goods
- but also for brass, tombac, tin and other non-ferrous metals.
Not suitable for objects used outdoors or in wet or damp rooms.
Application by brushing (fine hairbrush), spraying (small nozzle maximum 0.8mm) or diving (2x diving) possible.
ART DECO Anlegemilch 50ml
Artikel-Nr.: 334325
Auf Wasserbasis
Spezialkleber zum Anlegen von Blattmetallen und Blattmetallflocken.
Lieferumfang
50-ml-Glas.
Zapon lacquer 50ml
Artikel-Nr.: 334843
Zapon varnish
Transparent protective varnish for shiny metal and precious metal surfaces
High-gloss metal protective varnish based on synthetic resin
Prevents tarnishing, discoloration and corrosion (patina) on shiny metal surfaces
For many surfaces refined with leaf metal, e.g. concrete, plaster, terracotta
Fast drying
For indoor and outdoor
Properties:
• High-gloss, transparent metal protective varnish based on synthetic resin
• Prevents tarnishing, discoloration and corrosion (patina) on shiny metal surfaces
• For precious metals such as silver, copper, brass, bronze, tin, iron
• To protect surfaces finished with leaf metal, especially on moisture-retaining substrates such as concrete, plaster, terracotta and clay
• For indoor and outdoor
• The surface must be clean, dry and free of grease and oil. Let gold-plated objects dry for several days before painting over
• Apply thinly with a synthetic brush
• Suitable for dipping and spraying
• Dust dry after about 15 minutes, completely dry after about 1 hour.
• Brush cleaning with white spirit
Substrates:
• For precious metals such as silver, copper, brass, bronze, tin, iron
• For many surfaces refined with leaf metal, for example concrete, plaster, terracotta
To protect objects gilded with metal leaf and metal leaf flakes.
Contains: cellulose nitrate, solvent.
scope of delivery
50 ml bottle.
Proper protection is essential to ensure that beautiful things stay beautiful for a long time. With the KREUL Zapon varnish, gold-plated objects indoors and outdoors are optimally protected against discoloration, corrosion or tarnishing. The metal lacquer prevents unwanted impairment of the gold-plated surfaces. The quick-drying KREUL Zapon varnish is applied to the gold-plated surface with a brush. This means that refined favorite objects, made of concrete, plaster, terracotta or clay, among others, can shine unhindered.
Top coat for sheet metal
Artikel-Nr.: 359107
Shiny protection for refined items.
It's wonderful how gilded decorations shine. To ensure that it stays that way for a long time, the KREUL top coat is recommended as a finish. The protective varnish for indoor objects protects your new favorite decor from corrosion. The varnish is easy to apply with a brush and dries to a transparent glossy finish.
Characteristics
• High-gloss, transparent protective varnish for objects gilded with leaf metal
• Water-based
• For indoor applications
• Let objects gilded with leaf metal dry for several days before painting over them
• Apply evenly and thinly with a synthetic brush. Surface dry after approx. 30 minutes, completely dry when the protective varnish is uniformly transparent.
• Brush cleaning with water
Contents: 50 ml
MADE IN GERMANY
• Surfaces: To protect objects that have been gilded with KREUL leaf metal, such as picture frames, wooden parts, cards
Gold leaf metal, 6 leaves
Artikel-Nr.: 359108
Elegance through wafer-thin metal.
Golden sheen is inimitably beautiful and turns things into magnificent individual pieces. With the right basics and a little sure instinct, the traditional finishing technique from the restoration sector is also feasible for creative people. For this purpose, KREUL leaf metal with KREUL application milk is applied to the decorative face condition. The wafer-thin metal is available in the colors gold, silver and copper. Thus, a high-gloss look can be achieved on materials like wood, glass, cardboard, porcelain and much more. Simple accessories such as picture frames, wooden parts or bowls are turned into luxurious-looking art objects.
Characteristics
• Fine leaf metal for high-gloss, metallic looks
• Pack of 6 sheets, dimensions 140 x 140 mm
• For wood, glass, paper, canvas, cardboard, styrofoam, plastic, wax, ceramics, porcelain, dry concrete, terracotta, foil, metal, leather
• That's how it works:
The joint to be designed must be clean, free of dust and grease. Apply application milk (our reference 334325) and let it dry until it is transparent (duration at least 20 minutes). Put on sheet metal and use another brush to change (e.g. our reference 359109) and pull. Remove residues with a brush or cloth. After drying through (at least 12 hours), polish carefully with a soft polishing cloth or cotton wool. Let the gold-plated rights dry for several days and coat them with a top coat for sheet metal (our reference 359107) to protect against corrosion. Refer to zapon lacquer (e.g. our relationships 326082, 326111, 334843 or 334866) to protect the decoration in the outdoor area as well as to underload such as concrete, plaster, terracotta and clay
• Substrates: For wood, glass, paper, canvas, cardboard, styrofoam, plastic, wax, ceramics, porcelain, dry concrete, terracotta, foil, metal, leather
Brush for gilding with leaf metal, set of 2
Artikel-Nr.: 359109
Always the right brush at hand.
Gold-plated objects are breathtakingly beautiful. The finishing technique needs a lot of tact, but with the KREUL brush set for gilding it can be done without any problems. The secret: The creative brush set is equipped with two brushes, each intended for a specific work step. The dark synthetic brush is used to apply application milk (reference 334325) and top coat (reference 359107). The leaf metal (reference 359108) is applied with the light synthetic brush. So nothing sticks unnecessarily and the gilding works almost by itself with the brushes.
characteristics
• Brush set for gilding with application milk and leaf metal (references 334325 and 359108)
• Perfect for getting started with sheet metal art: the set includes all the brushes you need.
• For applying application milk and top coat: dark synthetics, flat size. 12, use (references 334325 and 359107)
• For laying on sheet metal: light nylon synthetics, flat size. 12, use (reference 359108)
• Brush cleaning with water
Contents: 1 x Synthetics, flat size. 12 for applying application milk and top coat; 1 x nylon synthetics, flat size. 12 for applying the leaf metal
Product information "Complete gold-plating set - start right away!"
High-quality complete set that contains everything that is needed for gilding with leaf metal!
You can get started right away.
• Complete set with everything that is needed for gilding with leaf metal
• Including sheet metal, application milk, brush and top coat
• Water-based
• For refining DIY objects indoors
• Perfect for beginners
• MADE IN GERMANY
• From the specialist in art supplies, C. Kreul
Characteristics:
• For refining decorative objects indoors such as picture frames, wooden parts, cards
• Fine leaf metal for high-gloss, metallic effects
• Water-based application milk and top coat
• To apply application milk and top coat: use a brush with dark hair
• To apply sheet metal: use a brush with light hair
THAT'S HOW IT'S DONE:
• The surface to be designed must be clean and free of dust and grease. Apply application milk with the dark brush and allow to dry transparently for 20 minutes. Lay on leaf metal and carefully press on with the dry, light-colored brush. Carefully remove residues with a brush or cloth. After a drying time of at least 12 hours, carefully polish with a soft polishing cloth.
• Let gold-plated objects dry out for several days and coat them with a top coat for leaf metal to protect them from corrosion. We recommend our Zapon varnish, for example our references 334843 (suitable from Kreul), 326082 or 326111 to protect the decoration in the outdoor area as well as on surfaces such as concrete, plaster, terracotta and clay.
Substrates:
• For absorbent and porous surfaces, e.g. wood, paper, canvas, cardboard, styrofoam, plastic, ceramic, porcelain, glass, concrete, terracotta, leather
CONTENT:
• Application milk 50 ml
• Top coat for leaf metal 50 ml
• 6 x gold leaf, 140 x 140 mm each
• Brush for application milk and top coat
• Brush for sheet metal
Golden sheen turns favorite pieces into something unique. This is very easy with the KREUL gilding with leaf metal set Golden Elegance. The complete set contains everything you need to gild decorative objects. From leaf metal in the color gold, to the special adhesive for applying the metal to the right brushes, everything is included. In this way, creative people can start refining straight away and do not need to worry about the right tools. After drying, the enclosed varnish ensures that the refined unique item remains beautiful for a long time. Gold plating is so uncomplicated that it is a lot of fun and fascinates with great results.
You can get started right away.
• Complete set with everything that is needed for gilding with leaf metal
• Including sheet metal, application milk, brush and top coat
• Water-based
• For refining DIY objects indoors
• Perfect for beginners
• MADE IN GERMANY
• From the specialist in art supplies, C. Kreul
Characteristics:
• For refining decorative objects indoors such as picture frames, wooden parts, cards
• Fine leaf metal for high-gloss, metallic effects
• Water-based application milk and top coat
• To apply application milk and top coat: use a brush with dark hair
• To apply sheet metal: use a brush with light hair
THAT'S HOW IT'S DONE:
• The surface to be designed must be clean and free of dust and grease. Apply application milk with the dark brush and allow to dry transparently for 20 minutes. Lay on leaf metal and carefully press on with the dry, light-colored brush. Carefully remove residues with a brush or cloth. After a drying time of at least 12 hours, carefully polish with a soft polishing cloth.
• Let gold-plated objects dry out for several days and coat them with a top coat for leaf metal to protect them from corrosion. We recommend our Zapon varnish, for example our references 334843 (suitable from Kreul), 326082 or 326111 to protect the decoration in the outdoor area as well as on surfaces such as concrete, plaster, terracotta and clay.
Substrates:
• For absorbent and porous surfaces, e.g. wood, paper, canvas, cardboard, styrofoam, plastic, ceramic, porcelain, glass, concrete, terracotta, leather
CONTENT:
• Application milk 50 ml
• Top coat for leaf metal 50 ml
• 6 x gold leaf, 140 x 140 mm each
• Brush for application milk and top coat
• Brush for sheet metal
Golden sheen turns favorite pieces into something unique. This is very easy with the KREUL gilding with leaf metal set Golden Elegance. The complete set contains everything you need to gild decorative objects. From leaf metal in the color gold, to the special adhesive for applying the metal to the right brushes, everything is included. In this way, creative people can start refining straight away and do not need to worry about the right tools. After drying, the enclosed varnish ensures that the refined unique item remains beautiful for a long time. Gold plating is so uncomplicated that it is a lot of fun and fascinates with great results.