- Tools/supplies
Mordant Vitrex
Product number:
4650062
Packaging Unit:
1
From Stock
Downloads
| Article name: | Mordant Vitrex |
|---|---|
| Content: | 500 |
| Dimensions height mm: | 125 |
| Dimensions Ø mm: | 80 |
| Gross weight grams: | 588 |
| Unit content: | g |
| Unité d'emballage petite: | 1 |
0 of 0 reviews
Login
No reviews found. Be the first to share your insights.
Product information "Mordant Vitrex"
The VITREX formula:
- For removing oxidations and flux residues from soldering points on all non-ferrous and precious metals.
The VITREX plus:
The particular advantage of our Vitrex powder is the constant activity. It works to the last drop. Vitrex removes oxides and flux residues from all precious and non-ferrous metals. Vitrex is unsuitable for iron.
The VITREX application:
- Prepare the solution: approx. 32g powder in approx. 250ml. Tap water as a supersaturated solution (approx. 50g to 400ml)
- Immerse the metal to be cleaned in the solution.
- Rinse with water after removal.
The VITREX tip:
- A solution heated to around 50 ° -70 ° C accelerates cleaning.
- The agent is suitable for pickling devices with polypropylene or stainless steel tubs.
The VITREX advisor:
When making your own stain, make sure that the acid is added to the water. This releases a considerable amount of heat. If you were to proceed the other way around, i.e. pour the water into the acid, the water droplets poured in could immediately heat up to the boiling point, and when they evaporate, they would splash out explosively parts of the acid. So please pay attention to the following: FIRST THE WATER, THEN THE ACID!
- The powder / solution is corrosive in combination with moisture
- Avoid contact with skin and eyes
- In the event of possible contact or wetting of the eyes, rinse immediately with plenty of water
- For removing oxidations and flux residues from soldering points on all non-ferrous and precious metals.
The VITREX plus:
The particular advantage of our Vitrex powder is the constant activity. It works to the last drop. Vitrex removes oxides and flux residues from all precious and non-ferrous metals. Vitrex is unsuitable for iron.
The VITREX application:
- Prepare the solution: approx. 32g powder in approx. 250ml. Tap water as a supersaturated solution (approx. 50g to 400ml)
- Immerse the metal to be cleaned in the solution.
- Rinse with water after removal.
The VITREX tip:
- A solution heated to around 50 ° -70 ° C accelerates cleaning.
- The agent is suitable for pickling devices with polypropylene or stainless steel tubs.
The VITREX advisor:
When making your own stain, make sure that the acid is added to the water. This releases a considerable amount of heat. If you were to proceed the other way around, i.e. pour the water into the acid, the water droplets poured in could immediately heat up to the boiling point, and when they evaporate, they would splash out explosively parts of the acid. So please pay attention to the following: FIRST THE WATER, THEN THE ACID!
- The powder / solution is corrosive in combination with moisture
- Avoid contact with skin and eyes
- In the event of possible contact or wetting of the eyes, rinse immediately with plenty of water