- Tools/supplies
BESTSELLER: Precision Welder PUK 6 inclusice welding microscope SM6
Product number:
362784
Packaging Unit:
1
Delivery time approx. 1 week
Article name: | Precision Welder |
---|---|
Brand: | Lampert |
Gross weight grams: | 12000,00 |
Magnification: | 10x |
Manufacturer name: | PUK 6 with microscope SM6 |
Volt/Hz: | 230 / 50 |
0 of 0 reviews
Login
No reviews found. Be the first to share your insights.
Accessoires (required)
Argon 4.6 with C10 cylinder
Welding gas according to EN ISO 14175
for welding process WIG/MIG
Composition: Ar. 99.996% (technical quality)
Special characteristics:
- Quiet and stable arc
- High process safety
- No burn-off of alloying constituents
- Universally usable
Attention:
Delivery only ex works!
(For delivery to German islands, an island surcharge applies)
Pick-up at Flume Technik in Essen is not possible!
Accessoires (optional)
Dimensions Ø mm:
0.25
|
Material:
750/- Gelbgold
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.25
|
Material:
585/- Gelbgold
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.20
|
Material:
750/- Weißgold
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.25
|
Material:
960/- Platin
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.35
|
Material:
Silber 970
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.30
|
Material:
Fine titanium
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.40
|
Material:
Edelstahl
Welding wire on coil for spot welding.
T-connector for shutter connection for PUK optical unit + microscope
Dimensions Ø mm:
0.40
|
Material:
Palladium
Welding wire on coil for spot welding.
For each selected waveform and device setting, the welding process can alternatively be triggered with the optional footswitch. This can make difficult workpiece geometries easier. Users familiar with laser, can trigger welding "as usual".
Accessories for "frequent welders" sucks off fumes and dusts generated during welding and neutralises it by means of an activated carbon filter. The absorber is automatically controlled by the welding device so that suction operates only during the welding process.
In spot welding, maintaining contact with workpieces is sometimes problematic. Tools can be combined safely with this contact band to achieve good electrical conductivity between the workpiece and the welding device.
In spot welding, maintaining contact with workpieces is sometimes problematic. Tools can be combined safely with this contact band to achieve good electrical conductivity between the workpiece and the welding device.
Using the tack welding set, loose parts can be quickly and easily fixed at a desired position in order to fully weld them in the next step.
The tack welding function thus is an aid for easy positioning, but not for final welding.
Preferred materials for this function are stainless steel and titanium.
Argon 4.6 Filling with C10 cylinder (in exchange for empty cylinder), including pick up from the customer
(The empty C10 bottle must be packed in a suitable box)
Welding gas according to EN ISO 14175
for welding process WIG/MIG
Composition: Ar. 99.996% (technical quality)
Special characteristics:
- Quiet and stable arc
- High process safety
- No burn-off of alloying constituents
- Universally usable
Attention:
Delivery only ex works!
(For delivery to German islands, an island surcharge applies)
Refilling at Flume Technik in Essen is not possible!
Please refer to the exchange cylinder overview for a listing of all cylinders that can be refilled.
Article name:
Electrodes Spezial without diamond grinding wheel
|
Special feature:
10 pcs 0,5 mm
Unser „Klassiker“ für das PUK-Schweissen – die Wolframelektrode „WLa“
Diese Elektroden „WLa“ haben sich für das PUK-Schweißen bewährt und zeichnen sich zusätzlich durch ein gutes Preis-Leistungs-Verhältnis aus.
Die Elektroden sind sehr universell einsetzbar und eignen sich sehr gut für Schweißungen von un- und hochlegierten Stählen, Aluminium-, Titan-, Nickel-, Kupfer-, Zinn- und Edelmetalllegierungen.
Die Elektroden „WLa“ sind in drei verschiedenen Durchmessern* verfügbar:
Ø 0,5 mm x 50 mm
Das bewährte Maß für Alltagsaufgaben in der Schmuckfertigung.
Insbesondere für kleine und mittlere Schweißleistung geeignet.
Tüte mit 10 Elektroden ohne Diamantscheibe.
Article name:
Electrodes Spezial without diamond grinding wheel
|
Special feature:
10 pieces 0,6 mm
Unser „Klassiker“ für das PUK-Schweissen – die Wolframelektrode „WLa“
Diese Elektroden „WLa“ haben sich für das PUK-Schweißen bewährt und zeichnen sich zusätzlich durch ein gutes Preis-Leistungs-Verhältnis aus.
Die Elektroden sind sehr universell einsetzbar und eignen sich sehr gut für Schweißungen von un- und hochlegierten Stählen, Aluminium-, Titan-, Nickel-, Kupfer-, Zinn- und Edelmetalllegierungen.
Die Elektroden „WLa“ sind in drei verschiedenen Durchmessern* verfügbar:
Ø 0,6 mm x 50 mm
Universell einsetzbar für feine Arbeiten wie auch für Schweißungen mit höherer Leistung.
Tüte mit 10 Elektroden ohne Diamantscheibe. (Abbildung ähnlich)
Article name:
Electrodes Spezial without diamond grinding wheel
|
Special feature:
10 pieces 0,8 mm
Unser „Klassiker“ für das PUK-Schweissen – die Wolframelektrode „WLa“
Diese Elektroden „WLa“ haben sich für das PUK-Schweißen bewährt und zeichnen sich zusätzlich durch ein gutes Preis-Leistungs-Verhältnis aus.
Die Elektroden sind sehr universell einsetzbar und eignen sich sehr gut für Schweißungen von un- und hochlegierten Stählen, Aluminium-, Titan-, Nickel-, Kupfer-, Zinn- und Edelmetalllegierungen.
Die Elektroden „WLa“ sind in drei verschiedenen Durchmessern* verfügbar:
Ø 0,8 mm x 50 mm
Besonders geeignet für Schweißungen mit hoher Leistung.
Geringster Elektrodenwiderstand daher größte Leistungsübertragung.
(Für die Größe 0,8 mm wird eine passende Spannzange (Flume-Artikel-Nummer 314006) benötigt
Tüte mit 10 Elektroden ohne Diamantscheibe. (Abbildung ähnlich)
Alternative for use of the included microscope. With connection to the PUK control unit via the control line on the unit for automatic darkening of the visual field during the ignition of the arc. Large visual field with 3 diopters magnification. Eye protection filter made of real glass. Glare-free magnifier. 230 V / 9 Watt Includes: - tripod arm for welding handpiece
Article name:
Special electrodes
|
Special feature:
10 pieces 0,6 mm
Content: 10 pieces and 1 diamond grinding wheel 4891622
Product information "Precision Welder PUK 6 inclusice welding microscope SM6"
The new PUK 6 - fine welding technology that sets standards.
The comparison with its predecessors shows: 20 years of experience and passion in development raise fine welding technology to an unprecedented level with the PUK 6.
WELDING
• Up to 3.3 welds per second: up to 65 % faster weld spot sequence
• More homogeneous, smoother weld spots - Excellent weld seam even with variable weld spot spacing
• Higher heat input if required: Perfect results even with critical materials
• 50 % finer weld spots in the lower power spectrum
• Minimum pulse duration now down to 0.1 ms: 67 % shorter welding time in micro mode
HANDPIECE AND ELECTRODES
• 20 % faster and therefore more agile electrode stroke
• Maximum electrode thickness now up to 1 mm
• Up to 50 % longer electrode life*
OPERATION
• 70 % higher display resolution with increased viewing angle under all ambient conditions
• Faster operation and material selection through direct control with a central control element
• New standby mode: Continuous availability with 85 % lower energy consumption
WELDING MICROSCOPE SM6
• New elegant design
• Perfectly matched to the PUK 6
• Height and tilt adjustment for optimum working comfort and ergonomic working position
• Padded hand rests for comfortable working
• LED illumination on the microscope head, adjustable in 4 brightness levels, optimum illumination of the working area
• High precision at 10x magnification (optional 15x)
• Electronically controlled LCD eye protection module
• Can also be used as a fully-fledged viewing microscope
Scope of delivery:
PUK 6 fine welding unit with handpiece, welding microscope SM6, gas hose 3m, mains cable, contact clamp, diamond grinding wheel, 4x electrodes 0.8mm WLa, 2x electrodes 1.0mm WLa.
The comparison with its predecessors shows: 20 years of experience and passion in development raise fine welding technology to an unprecedented level with the PUK 6.
WELDING
• Up to 3.3 welds per second: up to 65 % faster weld spot sequence
• More homogeneous, smoother weld spots - Excellent weld seam even with variable weld spot spacing
• Higher heat input if required: Perfect results even with critical materials
• 50 % finer weld spots in the lower power spectrum
• Minimum pulse duration now down to 0.1 ms: 67 % shorter welding time in micro mode
HANDPIECE AND ELECTRODES
• 20 % faster and therefore more agile electrode stroke
• Maximum electrode thickness now up to 1 mm
• Up to 50 % longer electrode life*
OPERATION
• 70 % higher display resolution with increased viewing angle under all ambient conditions
• Faster operation and material selection through direct control with a central control element
• New standby mode: Continuous availability with 85 % lower energy consumption
WELDING MICROSCOPE SM6
• New elegant design
• Perfectly matched to the PUK 6
• Height and tilt adjustment for optimum working comfort and ergonomic working position
• Padded hand rests for comfortable working
• LED illumination on the microscope head, adjustable in 4 brightness levels, optimum illumination of the working area
• High precision at 10x magnification (optional 15x)
• Electronically controlled LCD eye protection module
• Can also be used as a fully-fledged viewing microscope
Scope of delivery:
PUK 6 fine welding unit with handpiece, welding microscope SM6, gas hose 3m, mains cable, contact clamp, diamond grinding wheel, 4x electrodes 0.8mm WLa, 2x electrodes 1.0mm WLa.