- Tools/supplies
Sandblaster without chamber
Product number:
241112
Packaging Unit:
1
Extra order! Delivery time approx. 2 weeks, return is not possible.
| Article name: | Sandblaster |
|---|---|
| Brand: | Renfert |
| Content: | 1 |
| Dimensions height mm: | 260 |
| Dimensions width mm: | 130 |
| External dimension length: | 220 |
| Grain size: | 25-70 µ |
| Manufacturer name: | Basic mobil |
| Special feature: | 0,8 |
| Unit content: | Tank |
0 of 0 reviews
Login
No reviews found. Be the first to share your insights.
Accessoires (optional)
Measuring range:
16 bar
Oil-lubricated compressors, almost noise-free (whisper quiet), max. 48 dB (at 1 m distance), user-friendly, minimum maintenance, corrosion protection in the boiler, handy and easy to carry. The compressors are built as a complete air compressor unit and are equipped with heat switch-off, water separator, adjustable pressure regulator, quick coupling, safety valve, pressure gauge on the boiler and manually adjustable shut-off valve for condensate draining. br 230 V / 50 Hz, 680 Watt.
Three-stage filter system: - Prefilter: solid particles up to 40 ? - Fine filter: smallest solid particles and water droplets up to 0.01 ? - Activated carbon filter: oil up to a residual content of 0.003 ppm Perfectly reliable filtration of water, oil and dirt particles to avoid clumping of the blasting sand due to contamination of the compressed air.
Powerful suction with two-stage filter system with over 99.9% efficiency. Tear-resistant large (15 litre) filter bag made of nano-fibre fleece. Even hazardous fine dust created by the removal of moulding compounds with sandblasting equipment are retained by this filter system. High suction power. Electronic speed control for adjusting the suction force. Automatic switch with release delay for sandblasters. The collector motor is excluded from the warranty as it is a wear part. (Depending on the load, the average service life is approx. 800 hours). Connection: 230 V / 50 Hz.
Performance:
44 l/min
Oil-lubricated compressors, almost noise-free (whisper quiet), max. 40 to 55 dB (at 1 m distance), user-friendly, minimum maintenance, corrosion protection in the boiler, handy and easy to carry. Air suction capacity 50 L/min Air delivery capacity 32 l/min The compressors are built as a complete air compressor unit and are equipped with heat switch-off, water separator, adjustable pressure regulator, quick coupling, safety valve, pressure gauge on the boiler and manually adjustable shut-off valve for condensate draining. br 230 V / 50 Hz, 340 Watt.
Article name:
Blasting abrasive Cobra 50 ?
Colour: white. Slightly abrasive with low surface roughness. Gentle removal of oxides.
Article name:
Blasting abrasive Rolloblast 50 ?
For smoothing and polishing metals, achieves a satin sheen, removes dirt and moulding compound.
Article name:
Blasting abrasive Rolloblast 100 ?
For gentle blasting of moulding compounds as well as smoothing and polishing of metal surfaces.
Article name:
Blasting abrasive Cobra 125 ?
Colour: rose. Effective removal with medium roughness.
Article name:
Blasting abrasive Cobra 250 ?
Colour white. Very abrasive. For large-scale removal of investment materials and for the removal of hard oxide layers.
Product information "Sandblaster without chamber"
The sandblaster was reduced to a basic structure. Its mobility therefore depends only on the connection to compressed air. No power supply is required. Using different
versions of sandblasting modules, blasting media from 50 to 250 µm can be used. Ideal for use in an existing blast chamber.
Characteristic features
- Patented special mixing chambers for an even flow of blasting media
- Pressure indication via pressure gauge
- Integrated water separator
- Manual pneumatic shut-off valve for switching device on/off
- Control via pneumatic foot switch
Technical Specifications:
Tank capacity: 1000 ml each
Working pressure: 1-6 bar
Connection pressure: 6-10 bar
Air consumption: 120 l/min (at 6 bar)
The blasting unit requires an external compressor.
Compressor specification: 100 litres/min minimum. Suction, 6 bar pressure, micro filter 0.01?.
versions of sandblasting modules, blasting media from 50 to 250 µm can be used. Ideal for use in an existing blast chamber.
Characteristic features
- Patented special mixing chambers for an even flow of blasting media
- Pressure indication via pressure gauge
- Integrated water separator
- Manual pneumatic shut-off valve for switching device on/off
- Control via pneumatic foot switch
Technical Specifications:
Tank capacity: 1000 ml each
Working pressure: 1-6 bar
Connection pressure: 6-10 bar
Air consumption: 120 l/min (at 6 bar)
The blasting unit requires an external compressor.
Compressor specification: 100 litres/min minimum. Suction, 6 bar pressure, micro filter 0.01?.