Professional Services
0% financing
FLUME Premium
Postage and packaging free
Postage and packaging free
2% discount on
monthly billing & direct debit
monthly billing & direct debit
Flume service package
Training courses &
workshops
workshops
Top articles
Calf leather
Seam: tone in tone
Strap thickness: approx. 3.0 mm
Length: 114/ 82 mm
Width: 18/ 14 mm
Premium-Piece
The GraverMax G8 is an evolution of the previous model, GraverMax (#004-980). This engraving system extends the use application for each handpiece and does this with perfect control over the entire range of impact speeds. The GraverMax G8 provides 400 to 8000 beats per minute, features a pre-settable throttle valve to adjust the response behaviour, as well as a two-stage precision air pressure regulator. Its modern ergonomics includes air pressure adjustment on the front, quick release air pressure connections, a foot pedal connection on the back, and a modern impulse throttle unit that is virtually silent and vibration-free. The GraverMax G8 has connections for two handpieces and on connection for other pneumatic tools, including the handpiece "GRS Ultra 850". Handpieces and tools are sold separately. All standard handpieces fit this device. Compatible with Airtact. Includes: Graver-Max G8 device Foot pedal Power supply
RX 3130, RX 3131, RX 3132, RX 3135, RX 3136, RX 3155, RX 3175, RX 3185, RX 3186 Oscillating weight axel generic EB1496
W/o pocket watch!
Wooden base with black piano finish.
Dimensions
Inside diam. 68 mm, inside height from hook to base 85 mm. Total height 12.5 cm.
Tip
The KWM press-fit tool (reference 343259) can be screwed onto the KWM working block and thus used on every workstation, so it is transportable in contrast to the press-in unit without working block, which always has to be screwed into a suitable place. The KWM workstation ideally accommodates all the accessories, the supplementary tools, the KWM spigot and the KWM storage boxes so that the KWM storage system does not require any other accommodation. Includes base plate for convenient storage of the accessories (reference total assortment 344371), device for holding the KWM spigot dimension (reference 4422505), compartments for 2 assortment boxes (references 326965, 332347 - empty boxes).
Dimensions about:
Width: 370mm
Depth: 264mm
Height incl. 4 feet: 44mm
Base plate for practical storage of the accessories: approx. 120 x 120mm
including 2 compartments for KWM boxes, widths approx. 122mm each
Ideal for converting mechanical 400-day clocks as well as for new mantel or table clocks in the style of traditional anniversary clocks.
This unit operates completely independent from the clock movement and is simply glued or screwed into the clock's base.
Fit-up Ø
89 mm
Center hole
7 mm
Base thickness
Max. 5 mm
Watch movement quartz ETA 976.001, hour H 0.85 Standard
Radio-controlled clock movement with creeping seconds, HSL 14.5
Particularly popular for modern wall clocks.
Delivery including pair of hands bars, raw aluminum.
Advantage:
- Can be shortened to the desired length
- Raw version so that nothing flakes off when cutting
- Tip: You can color the hands yourself. (e.g. blackening with an edding on one or both sides or with a pointer varnish)
• Dimensions: 56 x 56 x 17mm
• DCF radio signal
• With setting options
• Very good radio reception (tested in the basement)
• Hand bushing (hole) dimensions: Ø 3.6mm (minute) x Ø 5.5mm (hour)
• Required: 1.5V Mignon LR6 / AA battery, e.g. our reference 331226
• Delivery including accessories (fastening screw, rubber washer)
• Delivery including second hand (red)
Echt Rindsleder, Naht: ohne, Bandstärke: ca. 2,5 mm
Länge 114/ 82
Breite 18/16
Premium-Piece
Exclusive set of 10 movements with Dugena 838 with the versions
• 2 x pointer shaft length 11mm (with second 13.5mm) - dial thickness up to 3mm
• 6 x pointer shaft length 16mm (with second 18.5mm) - dial thickness up to 7mm
• 2 x pointer shaft length 20mm (with second 22.5mm) - dial thickness up to 13mm
Equipment: retractable hanger and installation accessories. Please order pair of hands separately!
Matching pointers: up to max. 120mm
Installation Ø: 78mm
Delivery including second hand
Successor to the Junghans factory set 4123-104724
The clockworks are also available individually
In response to many customer requests, now available again on a practical USB stick with full-text search: The legendary Flume "Electronic Service System" catalogue.
The work, which originally appeared in 1977 and has been revised again and again, is the central information for the service of electronic watches, especially quartz watches, in the specialist workshop.
"With the illustrations, technical data, descriptions and information in this catalogue, a bridge is built between the watches to be repaired and the testing and measuring devices required for making the decision. Flume uses schematic representations to show how it is done. This information can be applied to any test - and measuring device in the workshop, to measure, to regulate, to set the time.", as Rudolf Flume once said in the foreword of the catalogue.
The heart of this catalog are the clockwork or module sheets that have been worked out in practice.
The first section is about "measuring - checking - regulating": including basic electronic terms and the components of electronic watches.
The larger second section is all about the "module and movement files", in which more than 600 calibers or movements from around 35 brands (including Bulova, Citizen, ESA, FE, Junghans, Omega, Parrenin, Pulsar, PUW, Ricoh, Ronda, Seiko, Tissot) are detailed and professionally listed with all the details (movement size, motor frequency, type of drive, battery, nominal voltage, load on the battery with resistance, current consumption, coil resistance and many explanations).
• The original FESS on a USB stick
• Extensive overview
• Central information for quartz watches
• Optimally searchable
• Detailed, knowledgeable, indispensable
Nutzen sie unsere günstigen Staffelpreise bei Abnahme von 120 - 240 oder 720 Stück.
Sie erhalten bis zu 30 Prozent Preisnachlass.
Tip
Die neue Generation - hergestellt in Deutschland. Vom Uhrmachermeister für Uhrmacher!
Für die rationelle Reparatur ausgelaufener Zapfenlager von Großuhren unter Verwendung des KWM Einpresslagersystems.
Das KWM-Gerät neu gedacht:
- Die Spannpratzen (für die Befestigung der Platinen) greifen nun noch besser
- Die Spannpratzen sind einfach und schnell verstellbar
- Die Montage der Platinen ist nun immer auf einer Ebene und plan mit dem Amboss
- Die Wange ist verstellbar (Vorteilhaft für sehr große Bauteile)
- Optimale Kraftübertragung
- Drücken mit einer Hand, drehen mit der anderen Hand - so lässt sich mit viel Gefühl dieses Premium-Modell besonders vorteilhaft nutzen!
Material:
- Korpus, Hebel und Spannpratzen aus Aluminium & eloxiert
- Die restlichen Teile aus Edelstahl und Messing
Optional erhältlich: Der neue Holzunterbau, Referenz 343259 (handgefertigt in Deutschland in präziser Tischlermeister-Qualität)
Wall clock Quartz "Porthole", mineral glass, also suitable for outdoor use, additional display of temperature and humidity
Reinigungskonzentrat. Messing, Bronze und Goldlegierungen werden aufgehellt. Spezialreiniger mit Ammoniak.
Mischungsverhältnis mit Wasser 1 : 9.
NEUES (PRODUKT)-DESIGN AB SOMMER 2018 (siehe Datenblätter und Informationen als PDF)
Tip
The new PUK 6 - fine welding technology that sets standards.
The comparison with its predecessors shows: 20 years of experience and passion in development raise fine welding technology to an unprecedented level with the PUK 6.
WELDING
• Up to 3.3 welds per second: up to 65 % faster weld spot sequence
• More homogeneous, smoother weld spots - Excellent weld seam even with variable weld spot spacing
• Higher heat input if required: Perfect results even with critical materials
• 50 % finer weld spots in the lower power spectrum
• Minimum pulse duration now down to 0.1 ms: 67 % shorter welding time in micro mode
HANDPIECE AND ELECTRODES
• 20 % faster and therefore more agile electrode stroke
• Maximum electrode thickness now up to 1 mm
• Up to 50 % longer electrode life*
OPERATION
• 70 % higher display resolution with increased viewing angle under all ambient conditions
• Faster operation and material selection through direct control with a central control element
• New standby mode: Continuous availability with 85 % lower energy consumption
WELDING MICROSCOPE SM6
• New elegant design
• Perfectly matched to the PUK 6
• Height and tilt adjustment for optimum working comfort and ergonomic working position
• Padded hand rests for comfortable working
• LED illumination on the microscope head, adjustable in 4 brightness levels, optimum illumination of the working area
• High precision at 10x magnification (optional 15x)
• Electronically controlled LCD eye protection module
• Can also be used as a fully-fledged viewing microscope
Scope of delivery:
PUK 6 fine welding unit with handpiece, welding microscope SM6, gas hose 3m, mains cable, contact clamp, diamond grinding wheel, 4x electrodes 0.8mm WLa, 2x electrodes 1.0mm WLa.
ETA 2820, ETA 2824-2, ETA 2836-2, ETA 2846 Federhaus komplett EB180/1
CUT ANYTHING YOU WANT!
- 40,000 VIBRATIONS per Sec.: With the vibration on the point of a cutter, it constantly applies friction to materials! Maximize efficiency & minimize heating!
- ABILITITY: You can cut various materials....plastic, formex, felt, balsa, kraftplex, leather, plywood, paperboard, acrylic, MDF, PCB, rubber
- ANYWHERE, ANYTIME: since the rechargeable batteries are built in, there are no space constraints!
- ANYBODY: Even people with not as strong handgrip can use the product easliy
- PORTABLE: Designed to be carried on the waist as it only weights 680g
- LOW POWER: Enerfy consumption is comparably lower with 35W which allows you to save electricity
Who would like WONDERCUTTER?
- 3D-Printing - to adjust of 3D printed materials smoothly and clearly
- DIY - to to architecture modeling easily and safely
- PLASTIC MODEL - to assemble plastic figure kits sharply and finely
- MODELMAKER, FASHION DESIGNER, HOBBYISTS, PROFESSIONALS....
What is in the box?
- Blades (40pcs)
- User manual
- Recharger
- WONDERCUTTER
Wondercutter is designed to cut 3mm plastic and it's capable of cutting upto 5mm.
CERTIFICATION
- GOLD PRICE - 44th Salon International Des Inventions Geneve
- GOLD PRICE - Seoul International Invention Fair
WONDERCUTTER IS EXCLUSIVELY DISTRIBUTED IN GERMANY BY FLUME TECHNIK
Carabiner curved gold 585/-Gg 11,00mm cast
Featured articles
Dieses hochpräzise und hochwertige Produkt eignet sich ideal für Goldschmiede, Steinfasser und Graveure, die sich einen ganz besonderen Zirkel wünschen. Dieses Werkzeug wurde von dem erstklassigen Steinfasser Alexandre Sidorov konzipiert und ist die perfekte Lösung für das Layout von Steinen, Fassungen und vielem mehr. Die austauschbaren Hartmetallspitzen bilden die Voraussetzung für optimale Festigkeit und Langlebigkeit. Die Spitzen lassen sich mit Diamantscheiben zudem modifizieren, um sie individuell an die Bedürfnisse des Künstlers anzupassen. Die hochwertige Konstruktion und Starrheit dieses Zirkels hebt sich von allen derzeit auf dem Markt erhältlichen Zirkeln ab.
Eigenschaften:
- Langlebige Stahlkonstruktion
- Austauschbare Hartmetallspitzen
- Gravierbare Scheibe zur Personalisierung
Technische Daten:
80 mm Länge
For: ETA 2801 / 2824-2 / 2834-2 / 2836-2.
Synthetic handle
Hardened stainless steel tip 54 HRC
Swiss made
The optimal successor movement for Kübler synchronous movements - now new and INCLUDING A SET OF HANDS!
Hassle-free installation with central fastening (central fastening thread 9mm).
- Powerful, particularly suitable for heavy and long hands.
- High accuracy thanks to control via the AC mains (230V 50HZ, 2.5W power consumption)
- Pointer shaft length (including screw): 36mm
- Clockwork dimensions: approx. 57 wide x 85 high x 46mm deep (without thread)
Delivery includes rubber washer and accessory screws
INCLUDING HAND SET: Hr 330, Min 450, Sec 450mm
Connection dimensions pointer:
Std. - 5.09mm round
Min - 4.00mm slot
Sec. - 2.00mm
Tip: For very heavy watch plates or dials, e.g. B. made of stone, when using battery or synchronous clock movements, a hanger can be mounted between the watch plate and the movement - the weight of the watch is then fully supported by the hanger (our reference 242399)
Der neue Mini Pickle von Durston Tools ist kompakt, sicher und einfach zu bedienen. Er erhitzt Flüssigkeiten in ca. 20 Minuten auf 60 bis 80 Grad und hält die Temperatur konstant.
Vorteil: Das Beizgerät ist kabellos (lässt sich einfach von der Basis abheben)
Inklusive Pulver
• säure-resistent
Eigenschaften
- 500ml Fassungsvermögen
- 60-80°C Betriebstemperatur
- 20 Minuten ungefähre Heizzeit
- 40-Watt-Heizung
- Ein/Aus-Kontrollschalter
- Sicherheitsabschaltung
Inklusive
- Mini-Beizgerät
- Basis / Netzkabel
- 1 x 150g Packung Beizmittelpulver
Das Gerät hat kein Thermostat
Tip
The KWM press-fit tool (reference 343259) can be screwed onto the KWM working block and thus used on every workstation, so it is transportable in contrast to the press-in unit without working block, which always has to be screwed into a suitable place. The KWM workstation ideally accommodates all the accessories, the supplementary tools, the KWM spigot and the KWM storage boxes so that the KWM storage system does not require any other accommodation. Includes base plate for convenient storage of the accessories (reference total assortment 344371), device for holding the KWM spigot dimension (reference 4422505), compartments for 2 assortment boxes (references 326965, 332347 - empty boxes).
Dimensions about:
Width: 370mm
Depth: 264mm
Height incl. 4 feet: 44mm
Base plate for practical storage of the accessories: approx. 120 x 120mm
including 2 compartments for KWM boxes, widths approx. 122mm each
Now also in simple, foil-wrapped packaging or as a tray of 40.
The high energy long-life power from Varta!
- Powerful energy for energy-hungry devices such as B. battery-operated toys, wireless computer accessories, flashlights, etc.
- Guaranteed shelf life of 10 years
- Made in Germany - Made to last. Guaranteed VARTA brand quality.
Country of origin: Germany
IEC LR03
MICRO, AAA, MN2400
Alkaline-manganese system
Volts 1.50
Tip
Die neue Generation - hergestellt in Deutschland. Vom Uhrmachermeister für Uhrmacher!
Für die rationelle Reparatur ausgelaufener Zapfenlager von Großuhren unter Verwendung des KWM Einpresslagersystems.
Das KWM-Gerät neu gedacht:
- Die Spannpratzen (für die Befestigung der Platinen) greifen nun noch besser
- Die Spannpratzen sind einfach und schnell verstellbar
- Die Montage der Platinen ist nun immer auf einer Ebene und plan mit dem Amboss
- Die Wange ist verstellbar (Vorteilhaft für sehr große Bauteile)
- Optimale Kraftübertragung
- Drücken mit einer Hand, drehen mit der anderen Hand - so lässt sich mit viel Gefühl dieses Premium-Modell besonders vorteilhaft nutzen!
Material:
- Korpus, Hebel und Spannpratzen aus Aluminium & eloxiert
- Die restlichen Teile aus Edelstahl und Messing
Optional erhältlich: Der neue Holzunterbau, Referenz 343259 (handgefertigt in Deutschland in präziser Tischlermeister-Qualität)
With fluted brass shaft, for clamping hand lathe tools up to dia. 4 mm.
Our battery brands
Article name:
377/376
Energizer 377/376 button cell
Authorized dealers
Simply subscribe, and benefit twice!
Subscribing to our newsletter here and now pays off for you. You benefit from many attractive offers, interesting news and important information. & Nbsp;